The reasons of power decline in laser marking machine!You must Know!

Laser marking machine is a professional industrial processing equipment, with a long time, it is easy to appear some sudden conditions. For example, many users have found that the power of the laser marking machine has decreased, and the following are the common reasons for the drop in the power of the laser marking machine.


1. marking speed is too fast

Solution: slow down the marking speed.


2. the voltage drop of the laser power supply leads to the drop of the output power of the laser

Solution: the power supply needs to be replaced.


3. optical path system inaccuracy

Solution one: adjust the laser.

Solution two: adjust the position of the beam expanding mirror, the incident light should be in the center of the light hole in the beam expander, and the ejection light should be in the center of the hole.

4. the surface of the workpiece is not in the focus plane

Solution: adjust the surface of the workpiece to the focus.


5. The position and direction of the beam mirrors are inaccurate

Solution: adjust the position of the beam enlargement mirror.


6. laser deviating from the center of the vibrating mirror

The solution: adjust the laser.


7. lens and lens have a fouling phenomenon

Solution: cleaning or replacing.



8. the long service life of the equipment is too long

The solution: Change a New Laser


When laser marking machine is being maintained and maintained, some operations need to be done by professional and technical personnel, so it is not necessary to disassemble and maintain itself, otherwise, it will damage not only the equipment, but also the operator.

The GEM Laser is a system designed for the purple day. Welcome to our website.

Comments

Post a Comment

Popular posts from this blog

A brief analysis of laser tailoring

Image
Laser tailoring has only appeared in the field of high fashion. However, as its technology has matured and its cost has been reduced, fast fashion brands like Topshop and ASOS have launched laser tailored clothing. First of all, it is necessary to understand what is the laser cutting. As the name suggests, laser tailoring is to use laser to cut all kinds of clothing materials. Compared with the traditional tailoring methods, laser tailoring is quite accurate and neat, and at the same time, it can prevent abrasion. The tailored clothing is also full of modern sense. In addition, due to the characteristics of the laser, laser cutting and no material restrictions, whether it is silk, nylon, feathers, chloroprene rubber, cotton or poly fiber will be nothing difficult. Besides, laser tailoring does not create any pressure on clothing, so there is no need to worry about unnecessary marks left during cutting. This advantage is especially suitable for silk and lace. And fashion designers l...
Read more

Fiber laser cutting machines are not omnipotent, and these materials must not be cut with it

Image
Many people think that fiber cutting machine belongs to the category of cutting machine, and imported laser range should be very wide, the effect should be a lot better than the other way, in fact, there are special types of cutting machine parts, each cutting machine has its advantages and disadvantages, the following detailed analysis. First of all , fiber Laser cutting machine belongs to the category of METAL cutting machine, so only cutting metal, not cutting cloth, skin, stone and other non metals, the reason is very simple, fiber laser cutting machine of the wavelength range is not within the range of the absorption material, or absorption is not appropriate, to reach the ideal cutting effect at present, it is applied to the metal cutting advantage is not obvious, of course, does not rule out future development needs in this area may. Secondly , do not recommend long-term cut aluminum, copper and other rare metal materials of fiber laser cutting machine , because these m...
Read more

[Actual Problems] Marking/Processing Problems

Image
Discover GEM solutions used to solve problems in real work sites on this page. Also, learn the tricks behind on-site improvements. Direct Marking on Surfaces Painted for Rustproofing Problem 1 We have metal products that are painted, and we are currently managing them by affixing labels, but we are wondering if there is a way to use laser markers to perform direct marking. However, the paint provides rustproofing, so it is pointless if this paint is peeled off. What should we do? Solution CO 2 We recommend that you try testing with a CO 2  laser marker! It is true that using a laser marker to mark a painted surface tends to peel off the paint due to the heat applied to the surface. However, it is possible to use a CO 2  laser marker to perform marking in which not all of the paint is removed and enough paint is left to still provide rustproofing. Our laser markers have been used to mark automotive undercarriage parts (cation-coated products), which are used ...
Read more