One Sided Pumped Solid State Laser Information

One-sided pumped solid state laser-GEMEP10Q Features

  • GEM Laser Co., Ltd  developed GEMEP10Q series single-side pumped solid-state lasers,
  • For laser marking, sculpture, diamond cutting, resistance fine-tuning and other users.GEMEP10Q series of laser
  • The instrument provides a high-efficiency TEM single mode laser, producing CW waves and Q-switched modulation. Control system / air
  • Cooling and cooling systems, communication ports are integrated into a compact chassis. USB or RS232 port, several
  • The maintenance-free GEMEP10Q series of lasers can be integrated into the user's fully automated equipment.

One Sided Pumped Solid State Laser

One sided pumped solid state laser-GEMEP10Q Specifications

Technical Parameters
GEMEP10Q-IR
GEMWP10Q-G
wavelength
1064nm
532nm
Output Power
10W at 10-20kHz
3W at 1kHz
5W at 5-10kHz
repeat frequency
1-30kHz
5-30kHz
Pulse Width
< 40ns at 1kHz
< 50ns at 5kHz
< 90ns at 20kHz
< 50ns at 5kHz
< 70ns at 10kHz
< 90ns at 20kHz
Pulse energy stability
<2% at 10 kHz
<1% at 5 kHz
Beam medium
<1.2
<1.2
polarization
Vertical, better 1:100
Vertical, 1:500
Operating temperature
10-30℃
10-30℃
Laser size
100(B)x65(H)x400(L)mm
110(B)x65(H)x450(L)mm
Power supply size
482(B)x132(H)x266(L)mm
482(B)x132(H)x266(L)mm
Laser weight
5kg
6.2 kg
Power supply weight
8.3 kg
8.3 kg
LD type / power / fiber
HLU808/32/600
HLU808/32/600
Trigger type
Internal, External TTL@50 Ohm
Internal, External TTL@50 Ohm
Power supply
Single phase, 110-240V, 300W
Single phase, 110-240V, 300W

One-sided pumped solid state laser-GEMEP10Q Application

GEM Laser Co., Ltd. developed GEMEP10Q series of single-sided pumped solid-state lasers, can be used for laser marking, engraving, diamond cutting, resistance fine-tuning and other purposes.

The GEM Laser is a system designed for the purple day. Welcome to our website.

Comments

Post a Comment

Popular posts from this blog

A brief analysis of laser tailoring

Image
Laser tailoring has only appeared in the field of high fashion. However, as its technology has matured and its cost has been reduced, fast fashion brands like Topshop and ASOS have launched laser tailored clothing. First of all, it is necessary to understand what is the laser cutting. As the name suggests, laser tailoring is to use laser to cut all kinds of clothing materials. Compared with the traditional tailoring methods, laser tailoring is quite accurate and neat, and at the same time, it can prevent abrasion. The tailored clothing is also full of modern sense. In addition, due to the characteristics of the laser, laser cutting and no material restrictions, whether it is silk, nylon, feathers, chloroprene rubber, cotton or poly fiber will be nothing difficult. Besides, laser tailoring does not create any pressure on clothing, so there is no need to worry about unnecessary marks left during cutting. This advantage is especially suitable for silk and lace. And fashion designers l...
Read more

[Actual Problems] Marking/Processing Problems

Image
Discover GEM solutions used to solve problems in real work sites on this page. Also, learn the tricks behind on-site improvements. Direct Marking on Surfaces Painted for Rustproofing Problem 1 We have metal products that are painted, and we are currently managing them by affixing labels, but we are wondering if there is a way to use laser markers to perform direct marking. However, the paint provides rustproofing, so it is pointless if this paint is peeled off. What should we do? Solution CO 2 We recommend that you try testing with a CO 2  laser marker! It is true that using a laser marker to mark a painted surface tends to peel off the paint due to the heat applied to the surface. However, it is possible to use a CO 2  laser marker to perform marking in which not all of the paint is removed and enough paint is left to still provide rustproofing. Our laser markers have been used to mark automotive undercarriage parts (cation-coated products), which are used ...
Read more

Fiber laser cutting machines are not omnipotent, and these materials must not be cut with it

Image
Many people think that fiber cutting machine belongs to the category of cutting machine, and imported laser range should be very wide, the effect should be a lot better than the other way, in fact, there are special types of cutting machine parts, each cutting machine has its advantages and disadvantages, the following detailed analysis. First of all , fiber Laser cutting machine belongs to the category of METAL cutting machine, so only cutting metal, not cutting cloth, skin, stone and other non metals, the reason is very simple, fiber laser cutting machine of the wavelength range is not within the range of the absorption material, or absorption is not appropriate, to reach the ideal cutting effect at present, it is applied to the metal cutting advantage is not obvious, of course, does not rule out future development needs in this area may. Secondly , do not recommend long-term cut aluminum, copper and other rare metal materials of fiber laser cutting machine , because these m...
Read more