Operating process of fiber laser cutting machine...you need know

Now the processing equipment of modern sheet metal industry an indispensable part of the fiber laser cutting machine, with the upgrading of the industrial upgrading of processing requirements, not only in efficiency with very high increase, in the operation of the optimization is to achieve the ultimate, below to introduce a specific operation process.


The operation steps of the  fiber laser cutting machine:

1., identify the materials that need to be processed, place the sheet metal materials on the machine tools, and then determine the smoothness of the material placement, so as to avoid jitter during the cutting process, resulting in the accuracy of the cutting can not meet the requirements.

2. operation console, input product cutting pattern, and cutting material thickness and other parameters, then adjust the cutting head to the appropriate focus position, then review and adjust the nozzle center.

3. start up the voltage regulator and the cold water machine, set up the water temperature and water pressure of the cold water cooler.

4. start the laser and then open the machine.

Although the above four points are very short, it takes a lot of time to practice in the actual operation, to familiarize yourself with the details of each operation. Unavoidable in the operation of optical fiber laser cutting machine, there will be some problems and problems, the following are also summarized to share.

1. There is no reflection on the opening
The supply pipe is burn: the replacement of insurance insurance tube.

The power input is normal: check the power input and the normal.

The power switch is damaged, replace the power switch.

2. no laser output or laser is very weak
The optical path is offset: carefully adjust the light path.

The equipment focus distance whether changes: to re adjust the focal length.

The laser tube is damaged or aging: replacement of the laser tube.

The laser power is energized: check the laser power supply circuit of the normal.

The laser power is damaged: the replacement of laser power supply.


3. machining dimensions have error or action error
The signal line is normal: the replacement of the signal line.

The power supply is not stable or disturbance signal adding or eliminating interference signal regulator.

The processing parameters are set correctly (such as layout): re set the corresponding parameters.

The processing program is normal: check processing procedures for the preparation of the modified to make the normal.

The GEM Laser is a system designed for the purple day. Welcome to our website.

Comments

Post a Comment

Popular posts from this blog

A brief analysis of laser tailoring

Image
Laser tailoring has only appeared in the field of high fashion. However, as its technology has matured and its cost has been reduced, fast fashion brands like Topshop and ASOS have launched laser tailored clothing. First of all, it is necessary to understand what is the laser cutting. As the name suggests, laser tailoring is to use laser to cut all kinds of clothing materials. Compared with the traditional tailoring methods, laser tailoring is quite accurate and neat, and at the same time, it can prevent abrasion. The tailored clothing is also full of modern sense. In addition, due to the characteristics of the laser, laser cutting and no material restrictions, whether it is silk, nylon, feathers, chloroprene rubber, cotton or poly fiber will be nothing difficult. Besides, laser tailoring does not create any pressure on clothing, so there is no need to worry about unnecessary marks left during cutting. This advantage is especially suitable for silk and lace. And fashion designers l
Read more

Analysis of the application of laser marking machine in auto parts

Image
Laser The laser is the atomic energy, computer, semiconductor human after another great invention, known as the "fastest knife," "the most accurate scale", "the brightest light" and "strange laser", it's 10 billion times the brightness of the sun, it can play the role of immeasurable. In recent years, with the development of automobile industry, the application of laser technology in automobiles has attracted more and more attention, including laser cutting, laser engraving, laser marking, laser welding, laser headlights and so on. As we all know, a complete car is made up of countless parts of the car, and there are several hundred kinds of auto parts. Then, how to distinguish, identify and manage such complex and diverse parts requires identifying information on its surface markings. The laser marking machine has occupied a place in the field of auto parts with the superiority of traditional processing methods. It not only shows
Read more

Regular maintenance of the laser cutting machine, How completely!

Image
1. Daily inspection and maintenance of machine tools A. check the pressure of the laser working gas and the cutting gas carefully before starting the laser cutting machine every day. If the gas pressure is not enough, it should be replaced in time. B. check the X axis zero point, the Y axis zero point, the Z axis zero point, the laser preparation state and other buttons are damaged, (check the indicator light). C. check the X axis, the Y axis, the zero point of the Z axis, the limit switch and the mounting screw for the collision block, and the sensitivity of the limit switch of each axis. D. check the water level in the cold water machine is enough, if the shortage must be added in time. E. checks the leakage of the circulating water circuit of the outer light road. It is necessary to deal with the leakage in time, otherwise it will affect the life of the optical lens. F.After the  was cut every day, check the focus lens lenses for damage. G. check whethe
Read more